Show sidebar
Show 9 12 18

BT-1

When we are designing the mechanical seal with sleeve on a shaft or making a stepped shaft, we balance the forces which

BT-TNG

Design with sleeve on a shaft enables seal applications with higher P-v values. BT-TNG type can be used in all standard applications and

BV-1

BV-1 type is mostly used for pumps and compressors in oil refining and petrochemical industry. It has got secondary shaft sealing with

BV-2

In BV-2 seal design springs are not emerged in operating fluid. In that manner spring blocking and material incompatibility problems are eliminated. In

BV-3

Balanced mechanical seal with wave spring.  Independent of direction of rotation.  Secondary shaft sealing with wedge or O-ring.  All other

CHEM NM-3

Mechanical seal metal part incompatibility to media is common problem when sealing aggressive, corrosive media. Mechanical seal type CHEM NM-3 with no metal parts

CHEM NM-4

Mechancial seal type CHEM NM-4 is mostly used in processing aggressive media. Mechanical seal is independent of direction of rotation. Secondary seal depend on

NM-1

Design with elastomer bellows is frequent and among most commonly used NM-1 type has got very good secondary sealing on a shaft with

NM-AD

Design with elastomer bellows is frequent and among most commonly used. Short length allows wide range of application. This type is highly recommended

NMM-1

Metal bellows mechanical seal has a very wide field of application, but because of high price we use it for extreme conditions,

NMM-2

Balanced seal. Independent of direction of rotation. Metal roller bellows. Roller bellows seals type NMM-2 have wide range of application.

NS-1

Simple mechanical seal for water pumps. Single spring configuration. Unbalanced. Dependant on shaft rotation direction. Face materials: carbon-graphite Cr-steel Cr-Ni

Load more products
Loading...